System Cant Satisfy the Requested Min Upstream Rate Please Input Again

April 22, 2022 Post a Comment

This Article Applies to:

Why nosotros need Bandwidth Control?

Within a normal home network, the bandwidth is shared by all computers. This means any computer using high-bandwidth applications, for instance torrent programs or other P2P software, volition affect the other computers. This may also include negative influence on the performance of the entire network. How can nosotros avoid this?

The answer isBandwidth Control, which is designed to minimize the impact caused when the connectedness is under heavy load. Using Bandwidth Command, we can assign a specific minimum or maximum bandwidth for each computer, which means they have less interference on each other. Please follow the steps beneath to configure this feature.

How to configure Bandwidth Control?

The scenario below will take 3 computers sharing 512KbpsEgress Bandwidth and 4MbpsIngress Bandwidth as an case, and explain how to use Bandwidth Control to optimize the load respectively.

Scenario:

Instance: ① PC1 often plays online game and downloads files which uses the most part of bandwidth.

② PC2 is used for watching movies on the Internet which besides needs much bandwidth.

③ PC3 is used for browsing websites usually, so information technology merely needs a few bandwidth.

Delight log in to the spider web management interface to setup bandwidth control.

Footstep 1

Open up the web browser and in the address bar type in the default access like : :http://tplinkwifi.net

Note:

Please find the default access on the lesser label of the product.

Footstep two

Type the username and password in the login page. The default username and password are bothadminin lower case.

Step three

Click onBandwidth Control-Command Settings on the left menu .

Note:

For example, if you accept a ADSL Modem, please choose "ADSL" on the line type. If you don't know how to choose theLine Type, please contact your Internet access provider which line type you have access.

TheEgress BandwidthandIngress Bandwidth should be the real bandwidth given by your ISP . ( 1Mbps=1024Kbps )

Step iv

ClickSaveto save the Settings .

Pace 5

ClickBandwidth Command -> Rules Listingon the left page, you can view and configure the rules .

Step 6

Click Add New to add a new dominion.

IP Range- Unmarried IP accost or IP address Range. When you lot configure the single IP address, the figurer with this IP accost will get contained given bandwidth. When you configure the IP address range, all computers in the range willshare the given bandwidth.

Port Range- The port arrange of TCP protocol or UDP protocol.

Protocol- You can choose the TCP protocol or UDP protocol or both of them.

Egress Bandwidth - The max and the min upload speed which through the WAN port, default number is 0.

Ingress Bandwidth - The max and the min download speed through the WAN port, default number is 0.

NOTE:

Yous'd better fix static IP Address on your local computers or configure Accost reservation on the wireless router in order to manage easily.

About how to configure TCP/IP backdrop on your reckoner, delight refer to FAQ 14

About how to configure Address Reservation, please refer to FAQ 182

Step 7

According to the demand of clients, the bandwidth could be allocated as following.

From the rules, the max Bandwidth can ensure that PC1 and PC2 tin take up all bandwidth when it's lone to access the Cyberspace and the min Bandwidth tin can ensure that they take the necessary bandwidth when more than one PC work at the aforementioned fourth dimension.

Note: The amount ofMin Egress Bandwidth and Min Ingress Bandwidth yous configure should be less than Egress Bandwidth andIngress Bandwidth you configure onBandwidth Control settings folio previously.

Stride 8

Enable the Bandwidth Control and click the Save button onBandwidth Control Settings to take effect.